Joyetech eVic Primo 2.0 + UNIMAX 2
Joyetech eVic Primo 2.0 + UNIMAX 2 Powered by dual replaceable 18650 batteries, the eVic Primo 2.0 provides durability and reliability with a 228W maximum output. Featuring the new equalizing charge system, it supports 2.0A quick charge capability..
Joyetech eVic Primo 2.0 + UNIMAX 2
Powered by dual replaceable 18650 batteries, the eVic Primo 2.0 provides durability and reliability with a 228W maximum output. Featuring the new equalizing charge system, it supports 2.0A quick charge capability. The UNIMAX 2 atomizer adopts the exclusive TFTA-Tank system where airflow control and e-liquid filling can be easily achieved by rotating or removing the top cap. The eVic Primo 2.0 also comes with upgradeable firmware, as well as multiple fashionable features including the real-time clock, custom logo and preheat. With the help of the RC (reverse charging) adapter, you can even use it as a power bank to charge your electronic products.
1 * eVic Primo 2.0 (no cell)
1 * UNIMAX 2 atomizer
2 * BFL-1 (0.25ohm) head
1 * Spare glass tube
1 * QC USB cable
2 * Manual
1 * Warranty card
2 * Warning card
Colors: silver, black/silver, black/red, black/grey, bronze
Battery weight: 156.0g (no cell)
Output mode: VW/VT (Ni, Ti, SS316)/TCR/Smart/RTC/USB Charge mode
Features: quick charge/reverse charge/preheat/custom logo/real-time clock
Output range: 1-228W
E-liquid capacity: 5ml
Resistance range: 0.05-1.5ohm under VT/TCR mode , 0.1-3.5ohm under VW mode
Applicable heads: BFL/BFXL coil heads, BF series heads (exclusive BF RBA/LVC/QCS) with BF adapter
Temperature control: 100-315°C/ 200-600°F
Battery using: dual married high-rate 18650 cells (continues discharge current 25A)
Max charging current: 2.0A
Max output current: 50A
Output voltage range: 0.5-9V
228W with 50A maximum output current
The eVic Primo 2.0 is powered by dual 18650 high-rate batteries where max output can be reached to 228W. It offers more possibilities when using various coils with its 50A maximum output current.
Applicable for various tanks
The exquisite spring loaded 510 connector of the eVic Primo 2.0 is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm. Tanks are also free to go up to 25mm diameter as you prefer.
Exclusive TFTA-Tank structure for easy operation
The Joyetech exclusive TFTA (top-filing and top-airflow) technology was perfectly applied into the UNIMAX 2 atomizer. Simply rotate the top cap to the left or right to adjust the airflow inlet. Unscrew the top cap and inject the e-liquid into the side holes from the top.
Flavor and cloud chasing
The BFL-1 (0.25ohm) head, using Kanthal coil, is the perfect combination for cloud chasing and pure flavor. It can be used under power mode with wattage setting at 40W to 80W.
Equalizing charge system
Equalizing charge technology was applied in order to bring all cells to an equal state of charge.
Innovative buck-boost technology
The eVic Primo 2.0 adopts the innovative buck-boost technology to provide much steadier output power.
Quick charge system
The eVic Primo 2.0 has 2.0A maximum charging current with which it can get fully charged more quickly than normal ones when using the Avatar quick charger (sell separately). eVic Primo 2.0 with UNIMAX 2
Power bank for reverse charge
The eVic Primo 2.0 can be served as a power bank to charge other e-cigarettes or electronic devices. Install the new reverse charging adapter (sell separately) on the 510 connector. eVic Primo 2.0 with UNIMAX 2
Onboard reverse polarity protection
The onboard reverse polarity protection protects the device from damage in the event of reverse battery installation.
Dual circuit protection
eVic Primo 2.0 applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes it more safe and reliable.
Large airflow and pure flavor
The UNIMAX 2 atomizer along with the newly constructed BFL coil head can ensure a large airflow inlet, producing a total pure flavor ever.
Detachable Structure, easy to clean
The UNIMAX 2 atomizer can be totally detached thus to wash or replace easily.
eVic Primo 2.0 comes with the upgradeable firmware. Having the latest Version 4.05, real-time clock, preheat, custom logo, and reverse charging are all available.
Atomizer head replacement
Unscrew the upper component, you'll find the atomizer head attached on the vent pipe. Remove the coil head to replace or clean. (NOTE: Please do not wash the atomizer head with water. Simply scrub it with cotton or clean dry cloth.)
Please always use married high-rate 18650 cells, don't mix with different brands. The eVic Primo 2.0 adopts new equalizing charge system which supports quick charge capability with max charging current up to 2.0A. You can also take out the cells and charge them in a stand alone charger.