Vapefly Brunhilde MTL RTA | The Most Beautiful Warrior of Valkyries

Vapefly Brunhilde

Brunhilde was a female warrior - one of the Valkyries! According to mythology, she was the daughter of the principal god Odin and the most beautiful of them!

The word is of Germanic origin. It’s a two-element name derived from the words brunni & hild, which mean armour, protection & battle, fight respectively. An older form of Brunhilde is Brynhildr (Old Norse).

In this article, you are going to learn about the latest great release by Vapefly – Brunhilde MTL RTA! A sublime Atomizer that promises to set extremely high new standards in the world of MTL tanks!

Initial Thoughts

As we can see, the MTL version retained the original design of Vapefly Brunhilde RTA. The appearance and structure design is identical to the RTA version. The coil-juice separation method is its unique feature. Using the stainless steel wires instead of the cotton to replenish juice is another unique feature.

The Airflow Screw

As an MTL version, airflow is always the first configuration we should discuss. Different from the others on the market, you can use a few airflow screws to DIY your airflow style. But first of all, you need to try every screw to find out the one works best for you.

Someone out there may be a little confused about this kind of design. Isn't it much more complicated and difficult to use by comparing it to the airflow adjustment ring type? Of course, it may look a little complicated to use the screws to adjust the airflow. But you just need to adjust it for the first time you use it. As long as you find the best screw for yourself, you do not need to change that anymore. On the other hand, even the screw you select is the most suitable for you, there's still a little restrictive or loose. Don't worry, you can also make minor adjustments to the air inlet.

Vapefly Brunhilde: An Extended View

Coil Building

The Vapefly Brunhilde MTL RTA is a single coil device. However, you will find there are four screws on the postless building deck. It just depends on the way you prefer to install your coil as always. I have to say that Vapefly is very considerate of packing everything you need. The t-type screwdriver is used to install the airflow screws and the Allen Key is used to install the coil. More than this, you will also get two pre-built coils and two pre-made pieces of cotton in the package.

And what surprised us a lot is the whole process of building the coil is pretty easy. There are no complicated operations. Simply install the coil and wick it.

The Holes

There're two holes on the side of the building deck. You can refill your juice through the smaller one and another one is to inlet the airflow. And there's a pattern to remind you which one is the filling hole. The thread of the drip tip is 510 and you will get an extra longer resin drip tip to replace. But I think this pre-installed one works best for me.

The Easiest Refilling in The World: Brunhilde

The Verdict

Talking about the cons, I think there's nothing to complain about. But I still need to talk about the airflow screws here. When I got this device and I checked all the parts. It just made me feel like this one is a super unique MTL RTA. The whole building process is quite easy. Although the uncommon airflow screws may make you feel hard to accept, it will change your mind after you set everything up.

As for the pros, I will reserve my opinion on the structure and appearance because people all have their standards of beauty. From my perspective, I think the design of the Vapefly Brunhilde MTL RTA is quite beautiful. The stainless steel wires are not strange to us because we've already seen that on the Vapefly Brunhilde RTA. I have to admit that's the coolest design ever. As for the actual performance, it always keeps my cotton soaked after doing some chain vapes.

The flavor this device gives me is beautiful. The coils you get from the package are both 1.0ohm, so you have to choose a smaller diameter screw if you're a restrictive MTL person. Of course, if you think you only need to make minor adjustments, you can also adjust the air holes directly.

Package Included

  1. Brunhilde MTL RTA
  2. Glass tube
  3. Long drip tip(resin)
  4. 2 * Stainless steel wires
  5. 6 * Screw airflow sets
  6. 9 * O-rings
  7. 2 * Pre-built 1.0ohm 26GA (Ni 80)
  8. Allen Key
  9. T-type screwdriver
  10. 8 * Screws
  11. 2 * Firebolt Cotton
  12. User manual


  • Diameter: 23.0m
  • Capacity: 5ml
  • Height of Drip Tip: 59.5mm
  • Drip tip: 510 (two height sizes)
  • Coil rebuildable: Single coil build
Vapefly Brubhilde

Write a comment

Please login or register to comment